Pyrolysis Machinery

PYROLYSIS PLANT (WASTE TYRE RECYCLING PLANT)
Pyrolysis machine for converting waste tires or plastic into fuel oil and carbon black.

Pyrolysis Plant
Pyrolysis Plant
 
TECHNICAL PARAMETERS
SERIAL NO. ITEMS CONTENTS
1 Raw material Scrap rubber Scrap rubber Scrap rubber
2 24-hour disposal amount 5 tons raw material 6 tons raw material 8 tons raw material
3 24-hour oil yield 2.25 tons fuel oil 2.7 tons fuel oil 3.6 tons fuel oil
4 Power 18 kw/hour 18 kw/hour 21 kw/hour
5 Mode of cooling Water cooling Water cooling Water cooling
6 Consumption of cooling water (T/h) 2.5 6 6
7 Kind of drive Internal gear drive Internal gear drive Internal gear drive
8 Heating mode Hot air Hot air Hot air
9 Noise dB (A) ≤ 85 ≤ 85 ≤ 85
10 External dimension of main machine (length× width) mm 5100×2200 6000×2200 6000×2800
 
SITE REQUIREMENTS

The whole pyrolysis machine need about 350 square meter area, width is 15 meter, length is 33 meter, heights is 8 meter (We suggest to build workshop after installing). The raw material should be according to your quantity of raw material.
 
MANPOWER, POWER, WATER REQUIREMENTS

The whole process need 3 to 5 workers, when the machine is running, only need one worker to operate it!
Power needed is 18 kw, the actuating device of main reactor is 5.5 kw, the high temperature induced draft fan is 7.5 kw, the other power is water pump and so on!
The cooling system will use cooling water, this water can cycle use, the usage is 6 tons per hour!
 
FINAL PRODUCTS

If your raw material is Truck Tyre:
  • Fuel oil 40-45%
  • Carbon black 35-40%
  • Steel 8-10%
  • Waste gas and steam 5%